Pages

Selasa, 11 Februari 2014

Removal and replacement Lifter motor assembly M103 printer hp laserjet p 4010 and 4015 series

Lifter-motor assembly (M103)

1. Remove the following components:
• Top accessory cover.
• Formatter cover and cage.
• Top cover.
• Right-side cover.
2. Release the wire harness from the retainer (callout 1).

Figure Remove the lifter motor


Release one tab (callout 2), and then remove the guide.

Figure  Remove the lifter motor


4. Disconnect one wire-harness connector (callout 3; J73).

Figure  Remove the lifter motor


5. Release one spring (callout 4).

NOTE: The spring is not captive. Do not lose the spring.

Figure  Remove the lifter motor


6. Remove one screw (callout 5), and then remove the lifter-motor retainer.

Figure Remove the lifter motor


7. Remove the lifter-motor assembly.

Figure  Remove the lifter motor

Related Post:

0 komentar:

Posting Komentar