Pages

Kamis, 06 Februari 2014

hp service printer laserjet p 4010 tray1

Tray 1 paper-pickup assembly

1. Remove the following assemblies:
• Top accessory cover. S
• Duplex accessory or cover.
• Tray 2 extension door.
• Formatter cover and cage.
• Top cover.
• Right-side cover.
• Left-side cover.
• Right front cover.
• Front cover.
2. Disconnect two wire-harness connectors (callout 1; J71, and J81), and then release the wire
harnesses from the guide (callout 2).

Figure  Remove the Tray 1 paper-pickup assembly


3. Remove eight screws (callout 3).

NOTE: The four outside screws on the assembly are a different type than the others. Make sure
that you replace the screws in the same position that they are removed from.

Figure  Remove the Tray 1 paper-pickup assembly


4. Rotate the left side of the assembly away from the chassis, and then slide the assembly to the left to remove it.

Figure Remove the Tray 1 pickup assembly


Feed-roller assembly

1. Remove the following components:
• Top accessory cover.
• Duplex accessory or cover.
• Tray 2 extension door.
• Formatter cover and cage.
• Top cover.
• Right-side cover.
• Left-side cover.
• Right front cover.
• Front cover.
• Tray 1 paper-pickup assembly.
2. Remove two screws (callout 1), and then remove the feed-roller assembly (callout 2).

Figure  Remove the feed-roller assembly

Related Post:

0 komentar:

Posting Komentar